Welcome, Tuesday, March 18, 2025

DMC HX23 Crimping Tool

SALES STATUS: Sold

DMC HX23 Crimping Tool

IBE SMT Inventory ID : 150501-099
DMC Serial Number : 796298
Vintage :

Details

with Foot Pedal

Specifications ( See Details above for installed options )

The HX23 accommodates most
M22520/5-XX military and Daniels
“Y” series crimp dies. This affords
utilization of existing dies and
interchangeability with M22520/5-01
(Daniels HX4) hand tool frames.

FULL CYCLE CONTROL
Full die closure is assured on every
crimp. The internal cycle control
network will not allow the tool to open
until complete closure is attained.
A simple procedure is available
to open the tool in cases where a
complete cycle cannot be effected. A
secure method is provided to prevent
unauthorized personnel from defeating
the cycle control system.

HANDS FREE OPERATION
There are no awkward levers or
mechanisms used to open or close
the crimp dies. These operations
waste time and distract the operator’s
attention. When the tool is in the
normal condition, the crimp dies are
fully open where contact assemblies
can easily be inserted. A touch of
the foot valve releases the dies to
a gripping position (spring pressure
only). When the operator is satisfied
that the contact assembly is positioned
correctly, another actuation of the
same foot valve completes the crimp
and quickly returns the die to open
position.

OPERATOR SAFETY FEATURES
The HX23 is equipped with a
transparent guard which affords the
protection, but does not restrict vision.
The Hands Free Operation system
allows the operator to position the
contact assembly while the die is
under spring pressure only. The
operator is then free to let the tool
hold the contact assembly during
the crimp cycle while the operator’s
hands and fingers are a safe distance
from the crimping die. The HX23 foot
valve assembly is constructed with a
protective shroud to prevent accidental
actuation. For operation the operator
places their foot under the shroud on
the pedal an depress.

FULL PNEUMATIC OPERATION
Standard clean, dry shop air at
pressure is all that is required to
operate the HX23 tool. There are no
electrical or hydraulic requirements.

Pictures

Click Any Image to View Slideshow

IBE SMT Equipment, LLC
318 Corporate Woods Drive, Magnolia, TX 77354
Toll Free: (800) 353-6942 Phone: (281) 259-9660 Fax: (281) 259-8863

DMC, HX23, Crimping, Tool, crimp, used, daniels manufacturing, dies, IBE ID: {IBEID} - IBE ID: 150501-099
All Equipment is subject to prior sale - All prices and terms are subject to change without notice. © Copyright 2007. IBE SMT Equipment, LLC All Rights Reserved.

E-Mail:	*	Invalid Email
	* Your E-mail Address will be your username for ibesmt.com
Password:	*	Invalid Password Password is required.
	* Your password must be 8 characters long
Confirm Password:	*	Passwords do not match

Email:
Password:
Remember Me?:


New User? Forgot Password?

E-mail Address:
Old Password:	*	Old Password is required.
New Password:	*	Invalid Password New Password is required.
	* Your password must be 8 characters long
Confirm New Password:	*	Passwords do not match

Full Name:
Company Name:
Phone Number:
Email Address:

Create an IBESMT.com Account

Login:

IBESMT.com Forgot Password:

IBESMT.com User Password Reset:

DMC HX23 Crimping Tool

Get Machine Quick Quote

Pictures